Spotify for Authors asks for RMS between -24 and -14 dB, a noise floor under -60 dB, 0.5 to 1 second of head time and 1 to 5 seconds of tail, and states no peak ceiling at all.[1] It prefers MP3 at 192 kbps or higher, CBR, 44.1 kHz, and accepts WAV and FLAC.[1][2]
Those numbers come from Spotify's own Metadata and Assets Guide, the document its upload page links to as the "full audio and metadata guidelines".[2] The guide was last updated in November 2024, and it opens with a clear warning: "Failure to meet these requirements may delay your audiobook's availability in stores."[1] So the figures are worth taking seriously, even where Spotify files them under "Recommended qualities".
If you already master to ACX spec, most of this page will feel familiar. Your file sits inside Spotify's window on every number the two specs share, with one detail worth a look: the room tone at the head of each file. The sections below lay the two specs side by side, show where they part ways, and walk through how a book actually reaches Spotify.
What does the official Spotify for Authors spec say?
The guide splits its audio rules into two parts. A short "Audio Specifications" block covers file formats, then a "Recommended qualities" block covers loudness, noise floor, head and tail time, and channels.[1] Here is how each line compares with ACX's published requirements.
| Requirement | Spotify for Authors[1] | ACX[3] |
|---|---|---|
| RMS loudness | -24 to -14 dB | -23 to -18 dB RMS |
| Peak level | not stated | no higher than -3 dB |
| Noise floor | under -60 dB | no higher than -60 dB RMS |
| Head time (room tone) | 0.5 to 1 s, recommended | 1 to 5 s, max 5 s |
| Tail time (room tone) | 1 to 5 s, recommended | 1 to 5 s, max 5 s |
| Sample rate | 44.1 kHz | 44.1 kHz |
| Bit depth | 16-bit (MP3 and WAV) | not stated |
| Channels | mono or stereo, not mixed | all mono or all stereo |
| Format and bitrate | MP3 192 kbps+ CBR; WAV, FLAC | MP3 only, 192 kbps+ CBR |
| Max file length | 120 min per file | 120 min per file |
| Credits | opening and closing, own files | opening and closing |
| Retail sample | 5 min max, no music or credits | 5 min or less |
Three rows carry more words than a cell holds. Spotify lists RMS, noise floor, head and tail time and channels under the heading "Recommended qualities". Its format line says MP3 is preferred at 192 kbps or higher with CBR preferred, and that WAV and FLAC are also accepted. Its credits rule asks for opening credits and, as a separate file, closing credits that reference the completion of the book (its example is "The End"); ACX asks for opening credits with title, author and narrator, and closing credits that indicate finality.[1][3]
A note on the wording, because it matters. Spotify's own words are "head time" and "tail"; they describe the same quiet lead-in and lead-out that narrators call room tone.[1] Spotify lists RMS, noise floor, head and tail time and channels under the heading "Recommended qualities", yet the RMS line itself reads "RMS must be between -24dB to -14dB" and the noise floor line reads "Noise Floor must be under -60dB".[1] The 120-minute cap, the credits and the retail sample are written as plain requirements, while the format lines say "preferred" and "accept".[1] The safe reading is to treat every number on the page as a target, since the guide says missing them may delay your release.
Spotify's RMS window is also wider than ACX's in both directions. It runs a full decibel quieter at the bottom (-24 against -23) and four decibels louder at the top (-14 against -18).[1][3] If you want the detail on what RMS measures and why it is the number that matters for spoken word, the guide to audiobook loudness and RMS covers it.
What does Spotify not state?
A peak ceiling. The guide's audio section covers format, sample rate, bit depth, RMS, noise floor, head and tail time and channels, and says nothing about peak level anywhere.[1] ACX, by contrast, requires peaks "no higher than -3dB to avoid distortion".[3]
That silence is not an invitation to clip. The same guide asks that audio "should not be harsh, sharp, or tinny" and should "have a high level of clarity", and a file pushed hard against full scale can fall foul of exactly those notes.[1] It also asks for no "background noise or hiss" and no "excessive mouth noises", which are quality notes rather than measured thresholds.[1]
In practice, keeping peaks below -3 dB costs you nothing on Spotify and keeps the same file valid for ACX. One master, two storefronts. Spotify's podcast rules are a different document with different measures, and the podcast versus audiobook comparison keeps the two apart.
Can you upload an ACX master to Spotify for Authors?
Yes, on every number the two specs share. Walk through the table and an ACX master lands inside each line:
- RMS: ACX's -23 to -18 dB sits entirely inside Spotify's -24 to -14 dB.[1][3]
- Noise floor: ACX asks for no higher than -60 dB RMS and Spotify for under -60 dB, so a floor comfortably below -60 dB satisfies both.[1][3]
- Format: ACX's MP3 at 192 kbps or higher CBR, 44.1 kHz, is the format Spotify says it prefers.[1][3]
- Channels: both accept mono or stereo, as long as every file matches.[1][3]
- File length: both cap each file at 120 minutes.[1][3]
- Tail room tone: both recommend 1 to 5 seconds.[1][3]
The one place the two specs pull apart is the head of each file. ACX recommends 1 to 5 seconds of room tone at the beginning, while Spotify recommends head time "within .5 to 1 second".[1][3] The two windows meet at exactly 1 second. Anything longer is inside ACX's recommendation and outside Spotify's.
So before you upload, look at the head room tone on your files. If it runs longer than a second, Spotify's guidance would have you trim it towards the 0.5 to 1 second range. Drop the file into the free Spotify audiobook check to see every row against Spotify's window before you upload. Both platforms phrase their head and tail figures as recommendations (ACX also sets a hard 5 second ceiling), so this is a refinement rather than a hard rejection, but the guide's warning about delays applies to the page as a whole.[1]
Beyond audio, the ACX credit conventions carry straight across. ACX asks for opening credits naming the title, author and narrator, and closing credits that indicate the book has ended (ACX's suggested wording ends "The End").[3] Spotify recommends "[Title], Written by [Author Name], Narrated by [Narrator Name]" for the opening, and a separate closing file that references "the completion of the book (e.g. 'The End')".[1] One quirk worth knowing about: the guide's Back Matter section also says "All audiobooks are not required to have ending credits", which sits awkwardly against the closing credits line.[1] Including a short closing file is the reading that satisfies both sentences, and ACX wants one anyway.
For the full ACX side of this comparison, the guide to ACX audio requirements explains every metric in depth.
How should files, credits and the retail sample be prepared?
Spotify's guide is prescriptive about packaging. The rules worth carrying into your export:[1]
- One file per chapter. Chapters, credits and introductions are standalone files. A book without chapters is split into segments of 30 to 120 minutes. A chapter longer than two hours is split, with the next file introduced as "Chapter X, continued."
- Spoken chapter headings. Each chapter should start with a verbal indication that it is a new chapter, and files should all have headings or all go without, not a mix.
- Opening credits stand alone. They contain only the title and the author and narrator names, and every narrator must be credited. A preface or author's note goes in its own file.
- File naming. Spotify recommends a format similar to
{ISBN}_{track number}.mp3so the files sort in order. - Retail sample. Maximum 5 minutes, no music, no audiobook credits, no explicit content, and named "ISBN_sample.mp3". If you do not provide one, Spotify generates one from a portion of a chapter.
The retail sample rule is close to ACX's, which caps the sample at 5 minutes and suggests using the first five minutes of the book.[3] Spotify instead asks you to pick "an engaging and dynamic part of the book (without spoilers)", and notes that some retailers cut their own samples anyway.[1]
Cover art follows the same thinking. The upload page asks for PNG or JPEG at a 1:1 ratio, with 3000 x 3000 pixels recommended.[2] The guide adds that it prefers a square PNG at 3000 x 3000 pixels and 300 dpi, lists 24-bit colour as a separate requirement, and requires the title and author to be clearly displayed.[1]
How does a book get onto Spotify?
There are two routes, and they can work together.
Direct upload through Spotify for Authors. It is free, there is no limit on how many audiobooks you upload, and it is non-exclusive, so you remain free to distribute elsewhere.[2] You upload MP3, WAV or FLAC files, and you need to complete your payment profile before you can publish.[2] Spotify says: "Within 3 business days your title will become available to listeners on Spotify."[2]
An ISBN is not needed for Spotify itself. Spotify's help centre says "ISBNs aren't required to publish an audiobook on Spotify", and it does not assign one for you.[4] The 2024 Metadata and Assets Guide adds the other half: a 13-digit ISBN beginning with 978 or 979 is required for distribution to retail partners including Apple and Google, and print or ebook ISBNs cannot be reused for the audio edition.[1] If you plan to distribute to retail partners, the guide suggests buying a dedicated audiobook ISBN from your local agency.[1]
Fan-out through Voices by INaudio. Once you opt in, Spotify sends a copy of every new audiobook you upload to its referral partner, Voices by INaudio (formerly Findaway Voices),[5] which distributes to "Apple Books, Google Play Books, and Audible" among others.[6] You can also send existing titles from your Catalog page, and opting out only affects future uploads.[6] There is one exception to plan around: "We don't currently share audiobooks with digital voice narration to referral partners."[6] A title narrated with a digital voice can still go live on Spotify,[7] but it will not reach the INaudio network this way.
If you are weighing the other storefronts in that list, the comparison of ACX, Findaway and Google Play audio requirements lines up their numbers in one table.
Why does Spotify matter more in 2026?
Reach. Spotify for Authors uploads are currently available to listeners in 22 countries.[6] On 7 October 2026 Spotify announced that "from now through the end of 2026, we're expanding audiobook access from 22 markets to over 180", and that "more than 750 million people around the world will soon be able to stream or purchase books on Spotify".[8] Listeners in the new markets will be able to access more than 350,000 titles, and Spotify states that "all of our partnerships are non-exclusive".[8]
Spotify has said its audiobook catalogue will reach over 180 markets by the end of 2026.[8] Its help centre still lists 22 countries for Spotify for Authors uploads, so check the live country list before you plan around the wider rollout.[6] Either way, one master that meets both specs keeps you ready for Spotify and ACX.
Common Questions
Can I upload my ACX master to Spotify for Authors?
Yes. An ACX master meets every number the two specs share: RMS -23 to -18 dB sits inside Spotify's -24 to -14 dB, the -60 dB noise floor matches, and 192 kbps CBR MP3 at 44.1 kHz is Spotify's preferred format.[1][3] The one detail to look at is head room tone. Spotify recommends 0.5 to 1 second at the start of each file, while ACX recommends 1 to 5 seconds, so the two meet at exactly 1 second.[1][3]
Does Spotify for Authors have a peak limit?
Is Spotify for Authors free?
How long does Spotify take to publish an audiobook?
Do I need an ISBN to publish on Spotify?
Is Spotify for Authors exclusive?
What are Spotify's retail sample rules?
Ready to submit?
Run the free ACX check to see exactly where your file stands, or let chapterpass master it to spec in one step.